Here are some stats on my receivers and data decoder. For the 3D models I created them in 3D Studio Max and rendered the vector output (Shockwave Flash) via Swift3D. Any high polygon count images were rendered in Max.
Yaesu VR-5000
Frequency Range: 0.1 ~ 2599.99998 MHz (Cellular blocked)
Receiving Mode: CW/LSB/USB/AM/AM-N/WAM/FM-N/WFM
Number of memory channels: 1000
Antenna Connection: 50 Ohm PL239, 450 Ohm push-terminal
Supply Voltage: DC 13.5V ±15 %
Audio Output: At least 1 W @ 8 Ohm
Dimensions (WHD): 7.1x2.75x8 inches 4.2 Lbs (180x70x203 mm)
Weight: Approx. 4.2 Lbs (1.9 kg)
With DSP unit.
Icom R75
Frequency Range: 0.03 ~ 60.000000 MHz
Receiving Mode: USB/LSB/CW/RTTY/AM/Sync-AM/FM
Number of memory channels: 101 (99 regular, 2 scan edges)
Antenna Connection: 50 Ohm PL239, 450 Ohm push-terminal
Supply Voltage: 13.8 V DC ±15%
Audio Output: More than 2.0 W at 10% distortion with an 8 load
Dimensions (WHD): 9.5 x 3.7 x 9.1 inches (241x94x229 mm)
Weight: Approx. 6 lb, 10 oz (3.0 kg)
With DSP unit.
Uniden BC780XLT
Frequency Range: 25 ~ 512, 806 ~ 1300 MHz (Cellular blocked)
Receiving Mode: AM/WFM/FM
Number of memory channels: 500
Antenna Connection: 50 Ohm BNC
Supply Voltage: 13.8 V DC
Audio Output: Maximum 3.0 watts (2.3 watts nominal @ 10% THD)
Dimensions (WHD): 7x2.75x6.6 inches (177x167x61 mm)
Weight: Approx. 42 oz (1.34 kg)
With mil surplus high-pass RF filter attached.
Info-Tech M6000v8
Data Decoder
Decoding Modes: CW/RTTY(ITA2,MIL,TEL,Russian Cyrillic)/ASCII/SITOR A & B(Autor,FEC,ARQ)/PACKET/ARQ-M2(TDM2)/ARQ-M4(TDM4)
Number of memory channels: 10, to program keywords to initiate printer output as well as often used decode settings
Antenna Connection: none
Supply Voltage: 120/240 V AC
Dimensions (WHD): 16 x 3 x 10 inches (241x94x229 mm)
Weight: Approx. 5 lb, 2 oz (2.8 kg)
Used together with small B&W 5" monitor.
Please do not reproduce anything within without permission.
Here are some stats on my receivers and data decoder. For the 3D models I created them in 3D Studio Max and rendered the vector output (Shockwave Flash) via Swift3D. Any high polygon count images were rendered in Max.
){kind=small}
